? semiconductor components industries, llc, 2004 january, 2004 ? rev. 1 1 publication order number: 1SS383T1G/d 1SS383T1G, 1ss383t2g preferred device dual schottky diode dual 40 v, 300 ma low v f schottky diodes in 4?lead sc?82 package. features ? low forward voltage: v f = 0.48 v (typ) @ i f = 100 ma ? low reverse current: i r = 5 a (max) ? pb?free package may be available. the g?suffix denotes a pb?free lead finish maximum ratings (t a = 25 c) rating symbol max unit continuous reverse voltage v r 40 v maximum peak forward current* i fm 300 ma peak forward surge current pulse width = 10 s i fm(surge) 500 ma *both devices active maximum ratings (t a = 25 c) rating symbol max unit thermal characteristics characteristic (both junctions heated) symbol max unit total device dissipation t a = 25 c derate above 25 c p d 200 (note 1) 1.6 (note 1) mw mw/ c thermal resistance junction-to-ambient r ja 625 (note 1) c/w junction and storage temperature t j , t stg ?55 to +150 c 1. fr?4 @ minimum pad. electrical characteristics (t a = 25 c unless otherwise noted) characteristic symbol min typ max unit forward voltage (i f = 1.0 ma) (i f = 10 ma) (i f = 100 ma) v f ? ? ? 280 360 540 ? ? 600 mv reverse current (v r = 40 v) i r ? ? 5 a capacitance (v r = 0, f = 1.0 mhz) c d ? ? 25 pf http://onsemi.com preferred devices are recommended choices for future use and best overall value. 2 1 sc?82 case 900aa ae = specific device code d = date code marking diagram ae d device package shipping 2 ordering information 1SS383T1G sc?82 4 mm pitch 3000/tape & reel 3 4 2for information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specification brochure, brd8011/d. 1ss383t2g sc?82 4 mm pitch 3000/tape & reel
1SS383T1G, 1ss383t2g http://onsemi.com 2 package dimensions sc?82, 4 lead, gull wing case 900aa?01 issue o notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: millimeters 3. maximum lead thickness includes lead finish thickness. minimum lead thickness is the minimumthickness of base material. 4. dimensions a and b do not include mold flash, protrusions, or gate burrs. style 1: pin 1. anode 1 2. anode 2 3. cathode 2 4. cathode 1 12 3 4 d e h b a a c l e e 1 dim min nom max millimeters a 0.80 0.90 1.00 a 0 ??? 0.10 b 0.10 0.20 0.30 c 0.10 0.18 0.25 d 1.80 2.00 2.20 e 1.15 1.25 1.35 e 1.30 bsc 2.00 2.10 2.20 l 0.10 0.20 0.30 0.032 0.035 0.04 0 ??? 0.004 0.004 0.008 0.012 0.004 0.007 0.010 0.071 0.079 0.087 0.045 0.049 0.053 0.051 bsc 0.079 0.083 0.087 0.004 0.008 0.012 min nom max inches 1 h e on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to mak e changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for an y particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. atypicalo parameters which may be provided in scillc data sheets and/or specifications can and do vary in different application s and actual performance may vary over time. all operating parameters, including atypicalso must be validated for each customer application by customer's technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiaries, af filiates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. publication ordering information n. american technical support : 800?282?9855 toll free usa/canada japan : on semiconductor, japan customer focus center 2?9?1 kamimeguro, meguro?ku, tokyo, japan 153?0051 phone : 81?3?5773?3850 1SS383T1G/d literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303?675?2175 or 800?344?3860 toll free usa/canada fax : 303?675?2176 or 800?344?3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : http://onsemi.com order literature : http://www.onsemi.com/litorder for additional information, please contact your local sales representative.
|
